NESS M1-XEP ETHERNET MODULE 101-215

NESS M1-XEP ETHERNET MODULE 101-215

 Description: 
The Ness-M1XEP  is an Ethernet Device Server with a RS-232 Serial Port Interface. It may be used to connect a Control in the M1 Family to an Ethernet network using TCP-IP protocol.
It features a secure embedded web server with a user interface built on a Java applet, email event notification, and FIPS compliant encryption algorithms for security sensitive environments.
It is powered by a 12 Volts DC, 1.5 Amp power supply/adapter. A software setup utility is built into Ness RP (version 1.5.0 or later) for configuring the connection setup, network password, etc.
The M1XEP is factory defaulted to obtain a dynamic IP address from a DHCP server (i.e. Ethernet switch, cable modem, etc.), however it may also be setup with a static IP address.

Benefits:
Web server with embedded Java applet "M1 Virtual Keypad" 
Secure connection with password protection and HTTPS encryption 
Flash Memory for Firmware Updating 
Event notification via E-Mail (SMTP) 
Internet Monitoring and Reporting Capability 
TCP/IP stack supporting the following protocols: TCP,UDP,DHCP,SSL 3.0/TLS 1.0, HTTP, SMTP 
Federal Information Processing Standards (FIPS) 128 bit encryption 
Integrated 802.3 compliant 10/100 Mbit network interface 
RS232, DB9M 9-pin serial port connection 
Connects to the M1 RS-232 Serial port (Port 0). The baud rate for this port must be set to 115,200 (factory default) 
RJ45 8-pin Network Jack 
2.1mm barrel type power connector (center positive) 
LED Indicators for Power, Link, and Data

Technical Features:
Operating Voltage: 12 Volts D.C. 
Current Draw: approx. 300 mA 
Housing Dimensions: 4.25" x 6.375" x 2.125" 
Circuit Board Dimensions: 2.25" x 3.95"