Main Features
- 1/3” Aptina Progressive Scan CMOS
- Day and night function with mechanical IR cut filter (ACM-3411 )
- Minimum illumination 0.5 Lux at F1.0 (ACM-3401) / 0.05 Lux at F1.0 (ACM-3411)
- Built-in f4.2 mm / F1.8 Megapixel fixed lens
(It is possible to replace the bundled lens with the optional lens for ACM-3401)
- 8 fps at 1280 x 1024 resolution
- Selectable MPEG-4 SP, MJPEG compressions
- Two-way audio
- Video motion detection
- Powered by PoE Class 3 / DC 12V
Fixed Dome CameraMegapixel IP PoE Fixed
Dome / Megapixel IP IR
D/N PoE Fixed Dome
• 1/3” Aptina Progressive Scan CMOS
• Day and night function with mechanical IR cut filter
(ACM-3411 )
• Minimum illumination 0.5 Lux at F1.0 (ACM-3401) /
0.05 Lux at F1.0 (ACM-3411)
• Built-in f4.2 mm / F1.8 Megapixel fixed lens (It is possible to
replace the bundled lens with the optional lens for ACM-3401)
• 8 fps at 1280 x 1024 resolution
• Selectable MPEG-4 SP, MJPEG compressions
• Two-way audio
• Video motion detection
• Powered by PoE Class 3 / DC 12V
Unit: mm [inch]
Lens
PLEN-0112 Fixed Iris, F2.0, 2.4 mm, 108.7°
(For ACM-3401 only)
Dome Cover
PDCX-0101 3-inch, smoke, non-vandal proof
Popular Mounting Solutions
Surface
Wall PMAX-0308
Pendant PMAX-0101
PMAX-0103
Corner PMAX-0101
PMAX-0303
PMAX-0402
Pole PMAX-0101
PMAX-0303
PMAX-0502
Flush PMAX-1006
Accessories not required* For more mounting solutions, please refer to Mounting Accessory section of Buyer’s
Guide or Project Planner v2.0 on www.acti.com
ACCESSORY OPTIONS
1
2 DC 12V Power InputAudio Input / OutputReset buttonDigital Input / OutputFixed Dome IP VIDEO SOLUTION PRODUCT PTZ Speed Dome Video Encoder Video Decoderw w w. a c t i . c omACM-3401 ACM-3411
• Device
Device Type Fixed Dome Camera
Image Sensor Aptina Progressive Scan CMOS
Sensor Size 1/3” (4.8 x 3.6 mm)
Day / Night No
Minimum Illumination Color: 0.5 lux at F1.0 (30 IRE, 2400°K)
B/W: 0.5 lux at F1.0 (30 IRE, 2400°K)
Color: 0.5 lux at F1.0 (30 IRE, 2400°K)
B/W: 0.05 lux at F1.0 (30 IRE, 2400°K)
Color to B/W switch DSP based switch, configurable CDS sensor based switch
Mechanical IR Cut Filter No
IR Sensitivity Range No 700 - 1100 nm
IR LED No
Electronic Shutter 1/30 - 1/1,000 sec (60Hz) (manual mode)
1/5 - 1/15,000 sec (auto mode); 1/25 - 1/1,000 sec (50Hz)
YesYes• Lens **
Focal Length Fixed focal, f4.2 mm / F1.8
Iris Fixed iris
Focus Fixed focus
Mount Type Board mount (Interchangeable lens) Board mount
Horizontal Viewing Angle 63.7°
Viewing Angle Adjustment Pan: 0° - 170°; Tilt: 0° - 180°
• Video
Compression MPEG-4 SP, MJPEG
Maximum Frame Rate vs.
Resolution
8 fps at 1280 x 1024 (SXGA); 10 fps at 1280 x 720 (HD 720p); 30 fps at 640 x 480 (VGA);
30 fps at 320 x 240 (QVGA); 30 fps at 160 x 112 (QQVGA)
Multi-Streaming Multiple streams based on single configuration
Bit Rate 28 Kbps - 3 Mbps (per stream)
Bit Rate Mode Constant, Variable
S/N Ratio More than 44 dB
Image Enhancement White balance: automatic, predefined and manual; Brightness; Saturation; Contrast; Sharpness; Automatic gain
control; Auto exposure: automatic, predefined and manual; Flickerless
Privacy Mask 1 configurable region
Text Overlay User defined text on video
Image Orientation Image flip and mirror
• Audio
Compression 8 kHz, Mono, PCM, 16 bit encoding
Audio-In Terminal block
Audio-Out Terminal block
• Network
Protocol & Service TCP, UDP, HTTP, HTTPS, DHCP, PPPoE, RTP, RTSP, DNS, DDNS, NTP, ICMP, ARP, IGMP, SMTP, FTP,
UPnP, SNMP, Bonjour
Ethernet Port 1, Ethernet (10/100 Base-T), RJ-45 connector
Security IP address filtering; HTTPS encryption; Password protected user levels
• Alarm
Alarm Trigger Video motion detection (3 regions); External device through digital input
Alarm Response Notify control center; Change camera settings; Command other devices; E-mail notification with snapshots;
Upload video, snapshot to FTP server; Activate external device through digital output
• Interface
Digital Input 1, TTL, terminal block
Digital Output 1, TTL, terminal block
• General
Power Source /
Consumption
PoE Class 3 (IEEE802.3af) / 4.3 W
DC 12V / 3.3 W
Weight 350 g (0.7 lb)
Dimensions (Ø x H) 130 mm x 99 mm (5.12” x 3.90”)
Mount Type Surface, Pendant, Wall, Corner, Pole, Flush
Operating Temperature -10 °C ~ 50 °C (14 °F ~ 122 °F)
Approvals CE, FCC
• Integration
Unified Solution Fully compatible with ACTi software
ISV Integration Software Development Kit (SDK) available
Firmware Access Browser Microsoft Internet Explorer 6.0 or newer
3
4
5
Box Bullet Cube
* All specifications are subject to change without notice.
* All brand names and registered trademarks are the property of their respective owners.
100830
3Ethernet port ACM-3401/ACM-3411